How to Reset the Samsung Galaxy Ring

Resetting your Samsung Galaxy Ring can help resolve various issues, such as software glitches or performance problems. There are different types of resets you can perform: a soft reset and a factory reset. In this guide, we will consider two way to factory reset your Galaxy ring.

How to Reset the Samsung Galaxy Ring

How to Reset Samsung Galaxy Ring

Resetting your Samsung Galaxy Ring can help resolve issues such as connectivity problems, inaccurate tracking, or performance glitches. Here’s a step-by-step guide to resetting your device.

1. Soft Reset

A soft reset is a simple restart of the device. This can help resolve minor glitches without affecting your data.

Steps:

  1. Locate the Power Button: Find the power button on the Galaxy Ring. This is typically a touch-sensitive area or a physical button depending on the model.
  2. Press and Hold: Press and hold the power button for about 10-15 seconds.
  3. Wait for Reboot: The device should turn off and then restart automatically. If it does not, you might need to press the power button again to start the device.

2. Factory Reset

A factory reset will erase all data on the Galaxy Ring and restore it to its original factory settings. This is useful if you’re experiencing persistent issues or preparing to sell or give away the device.

Steps:

a. Reset via Settings Menu:

  1. Access Settings: Open the Samsung Wearable app on your paired phone.
  2. Navigate to Device Settings: Select the connected Galaxy Ring from the list of devices.
  3. Find the Reset Option: Look for an option like “Device Settings,” “General,” or “Reset.”
  4. Choose Factory Reset: Select “Factory Reset” or “Reset Device” from the menu.
  5. Confirm: Follow the on-screen instructions to confirm the reset. You may need to enter a PIN or password if set.

b. Hard Reset (if the device is unresponsive):

  1. Ensure Battery Charge: Make sure the Galaxy Ring has enough charge or connect it to a charger.
  2. Power Off: If possible, turn off the device by holding the power button. If the device is unresponsive, skip this step.
  3. Press and Hold Buttons: Simultaneously press and hold the power button and any other relevant button (usually volume up or down) for 10-15 seconds until the device vibrates or shows a logo.
  4. Follow On-Screen Instructions: Use the buttons to navigate through the reset menu and select “Factory Reset” or “Wipe Data.” Confirm your choice.
  5. Restart: The device will restart and begin the reset process. It may take several minutes to complete.

c. Reset via Samsung Support:

If you’re unable to reset the Galaxy Ring using the methods above, or if the device is not responding, contacting Samsung Support for assistance may be necessary. They can guide you through additional troubleshooting steps or arrange for a service repair if needed.

Additional Tips:

  • Back Up Data: If possible, back up any important data before performing a factory reset, as this will erase all user data.
  • Charge the Device: Ensure the Galaxy Ring is adequately charged before performing a reset to avoid any interruptions during the process.
  • Follow Manufacturer Instructions: Always refer to the user manual or Samsung’s official website for specific instructions related to your Galaxy Ring model.

By following these steps, you can effectively reset your Samsung Galaxy Ring and address various issues that may arise.

Also Check: